Thursday, July 31, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Graph Freaks.
Her tubes are PTU but you do not need a lic. You can get it
and her work here at GraphFreaks.
http://graphfreaks.com/
PTU kit Rainbow Kazuki by Scrapping Krazy Designs.
http://scrappinkrazydesigns.blogspot.com/2014/07/new-ptu-kit-rainbow-kazuki.html
Mask of choice. I used Mask 44 MB and SW by Moonbeams and Spiderwebs.
http://moonbeamsandspiderwebs.blogspot.com/2012/09/mask-44-and-forum-mask-25.html
Font of choice. I used Ravie.
http://fontzone.net/font-details/ravie
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 44 MB and SW
p17 - 75%
ele39 - 85%
Tube - 90% or to fit
ele37 - 75%
ele24 - 85%
ele26 - 50%
ele29 - 40%
ele12 - 50%
ele04 - 50%
ele05 - 35%
ele32 - 20%
ele35
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste p17 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste ele39 as new layer. Add drop shadow.
Copy and paste tube as new layer and move to under frame layer.**
Add drop shadow. Seletions all, Float, Defloat. Go to frame layer
and erase the part over her arms and head. Seletiond none.
Copy and paste ele37 as new layer. Move to bottom right of tag.**
Add drop shadow.
Copy and paste ele24 as new layer. Move to bottom left of tag.**
Copy and paste ele26 as new layer. Move to top right of frame.**
Copy and paste ele29 as new layer. Move to bottom of frame.
Copy and paste ele12 as new layer. Move to bottom right of tag.**
Add drop shadow.
Copy and paste ele04 as new layer. Images Flip Horizontal. Move to
bottom right of tag.** Add drop shadow.
Copy and paste ele05 as new layer. Move to top left of frame.**
Add drop shadow.
Copy and paste ele32 as new layer. Move to infrom and left of bunny.**
Add drop shadow.
Copy and paste ele 35 as new layer.
I used Inner Bevel on the name settings are
Bevel #7 width 31
Smoothness - 44
Depth - 2
Ambience - -8
Shininess - 17
Angle - 315
Intensity - 69
Elevation - 21
Color - White
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/31/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Rainbow Kazuki in the subject line.
Can't wait to check them out!
Tuesday, July 29, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Zlata M.
You need a license to use his work. You can get it
and his work here at Pics for Design.
PTU kit Dragon Magick by Rissa's Designs.
Mask of choice. I used BD Mask_15 by Designz by BabyDragon.
Font of choice. I used French Script MT.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
RD_DM_Paper06 - 75%
DBD Mask_15
TUbe resize to Fit
RD_DM_Grass
RD_DM_Tree
RD_DM_Rocks - 50%
RD_DM_Dragon02 - 40%
RD_DM_Castle
RD_DM_MagickDust
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste RD_DM_Paper06 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste tube as new layer. Move to left a bit.**
Add drop shadow.
Copy and paste RD_DM_Grass as new layer.
Copy and paste RD_DM_Tree as new layer. Move to right of grass.**
Copy and paste RD_DM_Rocks as new layer. Move to bottom and left a bit.**
Add drop shadow. Duplicate Images Flip Horizontalm, resize by 75%
Move to right and behind the first rocks.
Copy and paste RD_DM_Dragon02 as new layer. Move him to over the
bigger rocks.** Add drop shadow.
Copy and paste RD_DM_Castle as new layer, Move to left of tag
and place behind tube layer.** Add drop shadow.
Copy and paste RD_DM_MagickDust as new layer. Images Flip Horizontal.**
Make top layer.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/29/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Dragons Magick in the subject line
Can't wait to check them out!
Thursday, July 24, 2014
This tut was made using PSPx4 and Animation shop.
And knowledge of PSPx4 and Animation Shop.
Supplies needed
Tube of choice. I used one by Elias Chatzoudis.
You need a license to use his work. You can get it
and hhis work here at Elias Art Shop.
PTU kit I am Devine by Wicked Princess Scraps.
Can get it at The PSP Project.
Animation used Candle Flames by Scrappy Bit of Fun.
Mask of choice. I used DBV Mask 15 by Designs b Vaybs.
Font of choice. I used Motion Picture.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
DBV Mask 15
WP_IAD_PP7
WP_IAD_FLOWER1 - 90%
WP_IAD_FRAME1 - 75%
Tube Close up Resized to fit
WP_IAD_VIOLIN - 65%
WP_IAD_BIRD - 25%
WP_IAD_FLOWER4 - 75%
WP_IAD_CANDLES
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600. Flood fill white.
Copy and paste WP_IAD_PP7 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste WP_IAD_FLOWER1 as new layer. Images Flip Horizontal.
Add drop Shadow.
Copy and paste WP_IAD_FRAME1 as new layer. Add drop shadow.
Copy and paste. tube as new layer. Move behind frame layer.
Add drop shadow. On tube layer selections all float defloat.
On frame layer erase parts of frame so it looks like the tube
is coming out of the frame. Selections none. Erase any tube
overhang.
Copy and paste WP_IAD_VIOLIN as new layer. Move to bottom right
of tag.** Add drop shadow.
Copy and paste WP_IAD_BIRD as new layer. Move to top left of the
tag.** Add drop shadow.
Copy and paste WP_IAD_FLOWER4 as new layer. Move to left of tag.**
Add drop shadow.
Copy and paste WP_IAD_CANDLES as new layers. Using pick tool resize
to a smaller size. Move to bottom right of tag.** Duplcate using pick
tool resize it to a different size. Repeat. Place them kinda of infront
of each other kinda zig zag.** Add drop shadow.
Add copyright info. Merge layers.Now for the Animation.
Open animation shop.
File Open new find the candle flames and open them.
Edit Select All.
In PSP copy the layers and then paste as new
animation in AS. Edit Duplicate selected till you
have same amount of frames as the candle flame.
Edit Select all.
Now take the flame from frame 1 amd move to over the flame
on frame one on one of the candles. Go back to candle frames and
hit undo you will see them reapear. Repeat for the other two falmes.
Back in PSP put your name on the tag add drop shadow. Copy and paste
as new layer. Copy that and past as new layer in AS. Edit Duplicate
selected till you have same amount of frames as your tag. Repeat same
process for your name as you did for the flames.
Save it and you are done.
This tutorial was written by Rebecca Townsley on 7/24/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Devine in the subject line.
Can't wait to check them out!
Tuesday, July 22, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Kiwi Fire Storm.
You need a license to use his work. You can get it
and his work here at The PSP Project.
FTU kit Fourth of July by Wicked Princess Scraps.
Template of Choice. I used by .
Mask of choice. I used Mask 62 by Millies PSP Madness.
Font of choice. I used Ravie.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 62
WP_FOJ_PP2 - 75%
WP_FOJ_FLAG1
WP_FOJ_BURST - 95%
WP_FOJ_STAR2 - 95%
Tube - 65% or resize to fit
WP_FOJ_WORDART - 75%
WP_FOJ_BIRD - 30%
WP_FOJ_CHAIN - 75%
WP_FOJ_FIRECRACKER - 50%
WP_FOJ_FLAGS - 60%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste WP_FOJ_PP2 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste WP_FOJ_FLAG1 as new layer. Move up a bit.**
Add drop shadow.
Copy and paste WP_FOJ_BURST as new layer. Add drop shadow.
Copy and paste WP_FOJ_STAR2 as new layer.
Copy and paste tube as new layer. Add drop Shadow.
Copy and paste WP_FOJ_WORDART as new layer. Move down to
bottom of tag.** Add drop shadow.
Copy and paste WP_FOJ_BIRD as new layer. Move to the top
left of the USA.** Add drop shadow.
Copy and paste WP_FOJ_CHAIN as new layer. Move to the
top right of the USA.** Add drop shadow.
Copy and paste WP_FOJ_FIRECRACKER as new layer. Move to bottom
right of the USA.** Add drop shadow.
Copy and paste WP_FOJ_FLAGS and move to top of tag.**
Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/22/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
USA in the subject line
Can't wait to check them out!
Monday, July 21, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Barbara Jensen.
You need a license to use her. You can get it
and her work here at Barbara Jensen Store.
PTU kit Cherish by Kissed by Kelz.
Can be found at Scrap Candy Store.
Template of Choice. I used Timeline Template 56 by Millies PSP Madness.
Font of choice. I used Shelley Script LT std.
Which is a PTU Font. Simaler Font yo use Allegro.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Timeline Template 56
Tube Resize to fit
Papers KBK_Cherish (16)
Papers KBK_Cherish (11)
Papers KBK_Cherish (23)
Papers KBK_Cherish (39)
Papers KBK_Cherish (4)
Elements KBK_Cherish (10)
Elements KBK_Cherish (15) - 20%
Elements KBK_Cherish (19)
Elements KBK_Cherish (37)
Elements KBK_Cherish (66)
Elements KBK_Cherish (79) - 40%
Elements KBK_Cherish (14)
Elements KBK_Cherish (127)
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Open template. Shift+D to duplicate close original. Delete the
blog info layer.
Click on background layer copy and paste papers KBK_Cherish (16)
as new layer. Delete background layer.
Click on layer 1 Selections all float defloat invert. Copy and
paste papers KBK_Cherish (11) as new layer click delete. Selections
none. You will want to erase the edges of where you deleted.
Add drop Shadow. Delete Layer 1.
Click on layer 2 Selections all float defloat invert. Copy and
paste papers KBK_Cherish (23) as new layer click delete. Selections
none. You will want to erase the edges of where you deleted.
Add drop Shadow. Delete Layer 2.
Click on layer 3 Selections all float defloat invert. Copy and
paste papers KBK_Cherish (39) as new layer click delete. Selections
none. You will want to erase the edges of where you deleted.
Add drop Shadow. Delete Layer 3.
Click on layer 4 Selections all float defloat invert. Copy and
paste papers KBK_Cherish (4) as new layer click delete. Selections
none. You will want to erase the edges of where you deleted.
Add drop Shadow. Delete Layer 4.
Add drop shadows to layers 7 and 8 ( dotted stars)
Move layer 6 to top layer.
Copy and paste tube as new layer. Move to right of tag. Images
Flip Horizontal.** Add drop shadow.
Using your Color Changer tool ( where your floodfill is at) Pick
a color from tube and change color of Layers 5 and a different
color for layer 6
Click on Rastor 5. Copy and paste Elements KBK_Cherish (10) as new
layer. Move down to bottom a bit.**
Click on layer 5 (the word Sweetest) Copy and paste Elements KBK_Cherish (15)
as new layer. Move to top left over the word.** Add drop shadow.
Copy and paste Elements KBK_Cherish (19) as new layer. Make it your top layer.
Move to left of tag and down a bit.** Add drop shadow.
Copy and paste Elements KBK_Cherish (37) as new layer. Move to left
just over the leafes.** Add drop shadow.
Click on Rastor 3. Copy and paste Elements KBK_Cherish (66) as new layer.
Move up a bit.** Add drop shadow.
Copy and paste Elements KBK_Cherish (79) as new layer. Make it your top
layer. Move to bottom right of tag.** Add drop shadow.
Copy and paste Elements KBK_Cherish (14) as new layer. Move to just under
the Sweetest words.**
Copy and paste Elements KBK_Cherish (127) as new layer. Move to left.
Duplicate move duplicate to the right.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/21/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Waiting for You in the subject line
Can't wait to check them out!
Wednesday, July 16, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Alex Prihodko.
You need a license to use his work. You can get it
and his work here at Pics for Design.
PTU kit Lemon Verbina by Irish Princess Designs.
Mask of choice. I used MB and SW Mask 5 by Moonbeans and Spiderwebs.
Font of choice. I used LaDanse.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
MB and SW Mask 5
IPD_LV_Paper8 - 60%
IPD_LV_Sparkles
IPD_LV_Frame
tube - 40% or resize to fit
IPD_LV_Lanturn1 - 85%
IPD_LV_Mushroom
IPD_LV_TallFlower - 85%
IPD_LV_Leaves
IPD_LV_LongBranch - 85%
IPD_LV_FlowerTrio - 40%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste IPD_LV_Paper8 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste IPD_LV_Sparkles as new layer.
Copy and paste IPD_LV_Frame as new layer.
Add drop Shadow.
Copy and paste tube as new layer. Add drop shadow. Move to behind
frame layer. Selections all, float, defloat. On frame layer erase
where the tube head is to look like it is coming out f the frame.
Selections none. Erase bottom of tube over hang.
Copy and paste IPD_LV_Lanturn1 as new layer. Move to right side
of the tag.** Add drop Shadow.
Copy and paste IPD_LV_Mushroom as new layer. Move to in front of
the lanturn.** Add rop shadow.
Copy and paste IPD_LV_TallFlower as new layer. Move to left of
tag.** Add drop shadow.
Copy and paste IPD_LV_Leaves. Move to bottom of tag.**
Add drop shadow.
Copy and paste IPD_LV_LongBranch as new layer. Move to bottom of
tag. Images, flip horizontal.** Add drop shadow.
Copy and paste IPD_LV_FlowerTrio as new layer. Move to bottom left
of tag.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/16/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Lemon Verbina in the subject line
Can't wait to check them out!
Friday, July 11, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Zindy.
You need a license to use her work. You can get it
and her work here at Zindy Zone Shop.
PTU kit Release Me by Tasha's Playground.
Mask of choice MB and SW Mask 13. I used by Moonbeams and Spiderwebs.
Font of choice. I used Witched.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
MB and SW Mask 13
paper8 - 75%
frame6
tube
doodle
bow2 - 95%
key
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
This one is short and sweet.
Start off with New image 600 x 600.
Copy and paste paper8 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste frame6 as new layer.
Add drop shadow.
Copy and paste tube as new layer. Move below frame layer.**
Erase any hangover from outside of frame.** Add drop shadow.
Copy and paste doodle as new layer. Move to under tube layer
and then down and right a bit.** Add drop shadow.
Copy and paste bow2 as new layer. Move to top left of frame.**
Add drop shadow.
Copy and paste key as new layer. Images, flip horizontal,
move to bottom left of tag.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/11/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Release Me in the subject line
Can't wait to check them out!
Thursday, July 10, 2014
This tut was made using PSPx4.
And knowledge of PSPx4.
Supplies needed
Tube of choice. I used one by Selina Fench.
You need a license to use her work. You can get it
and her work here at Fairies and Fantasy.
PTU kit Pirates Ahoy by Scrappin Krazy Designs.
Mask of choice. I used Mask 41 MB and SW by Moonbeans and Spiderwebs.
Font of choice. I used BadDog.
Go ahead and open list of Things here used and go ahead and resize them
by the percentage by each item. If there is no number no need to resize.
Mask 41 MB and SW
p04 - 75%
tube - to fit
frame - ele03 - 80%
anchor - ele68
sand - ele39 - 85%
flat money - ele15 - 50%
plant - ele26 - 50%
flag - ele64 - 35%
rock - ele42 - 35%
rocks - ele50 - 35%
steering w ele89 - 35%
shells - ele80 - 35%
spyglass - ele91 - 35%
map - ele92 - 35%
When you see ** look at tag to see placement for Elements.
Sometimes it is hard to say just how to place it.
Drop shadows added are 0.0.100.4 unless otherwise stated.
It is always good to check for overhang of shadow on edges of tag.
I have made a tag or to and not check and when I got done
I would post it and see the over hang on the sides and think MAN!! lol
Remember to save often.
Start off with New image 600 x 600.
Copy and paste p04 as new layer. Layers, New Mask layer.
Find the mask in the list Click ok. Merge group
Copy and paste tube as new layer.
Copy and paste ele03 as new layer.
Copy and paste ele68 as new layer. Move to right of frame.
On the tube selections all, float, defloat. Erase frame and
anchor from top over mermaid. Selections none. add drop
shadow to frame, tube and anchor.
Copy and paste ele39 as new layer. Move to bottom of tag.**
Copy and paste ele15 as new layer. Move slightly yo right.**
Add drop shadow.
Copy and paste ele26 as new layer. Move to right of tag.**
Add drop shadow
Copy and paste ele64 as new layer. Move to over plant.**
Add drop shadow.
Copy and paste ele42 as new layer. Move to right of tag.**
Add drop shadow.
Copy and paste ele50 as new layer. Move just to left of
Big rock.** Add drop shadow.
Copy and paste ele89 as new layer. Move to bottom left
of tag.** Add drop shadow.
Copy and paste ele80 as new layer. Move just to right of
the Wheel** Add drop shadow.
Copy and paste ele91 as new layer. Move over sheels and
wheel.** Add drop shadow.
Copy and paste ele92 as new layer. Move to right over
rocks.** Add drop shadow.
Add proper copyright. url and Lic if required.
Add name and your done.
This tutorial was written by Rebecca Townsley on 7/10/14.
Any similarity to any other tutorial is purely coincidental.
Any creations you make following this tutorial is yours
to do with as you please as long as there is no profit made.
This tutorial is not to be copied or passed around.
I would love to see your results!
If you would like them shown on my blog
Send them to dragonsfairy_25@hotmail.com with
Pirate Mermaid Ahoy! in the subject line
Can't wait to check them out!
Subscribe to:
Posts
(Atom)